the protection. If you want to polish the hack (cover your tracks, find
passwords, etc.) here's some advanced steps you can take:

  * If you know that your sysadmin keeps logs Copy the system folder to
    the hard drive. Rename the original system folder. Reboot without At
    Ease. When you are done, put the real system folder back and delete
    the second one.

  * If you aren't concerned about logs, just move the At Ease Preferences
    out of the System Folder: Extensions folder and reboot. Remember to
    put them back when you are done.

  * Install one of the aforementioned Keystroke recorders. Wait a few days
    and check the logs from the recorder. You should have the
    administrator password!

Crashing the System--Another Hack for At Ease lies in Crashing the system
it's running on. Just keep opening applications until all the RAM is
consumed. On older versions of At Ease, a dialogue box will appear that
asking you if you would like to quit At Ease to free up RAM. Click yes!

Null Password--Open the file System Folder:At Ease:At Ease Preferences with
MSWord or any ther text editor. Look for the string "MFDR\      ]". Delete
everything between "\" and "]". Save the changes and you have a null
password. Now you can go to At Ease Setup and change the password to whatever
you want!

OEM Hack---The following directions are excerpted from the At Ease
Administration Manual from the Section: 'What do I do if I forget my
Administrator Password?'

  If you forget the At Ease administrator's password, follow the
  directions below instead of those in the manual. If your startup disk is
  locked, you'll first need to run the Unlock application on the AT Ease
  2.0 Utilities disk to unlock the start-up disk. Consult the manual for
  information about the Unlock application.

    1. Start up your computer from another startup disk.
    2. Open the System Folder of your usual startup disk.
    3. Open the At Ease Items folder inside your System Folder.
    4. Drag the At Ease Preferences file into the trash.
    5. Hold down the Option key while you choose Empty Trash from the
       Special menu.
    6. Restart from your usual startup disk.
    7. Open the At Ease Setup for Workgroups application.

   Note: If you are using an AppleShare server volume as the At Ease disk,
         your setups may not appear until you reset the At Ease disk to
         this server volume.

    8. Reconnect to the server volume and use the At Ease Disk command to
       reselect the volume.

   Note: Make sure you use the information on the server instead of
         replacing it with the information on the startup disk.

    9. Add a new password and clue.
   10. Make sure the following options set correctly:

       * Allow Remote Administration checkbox
       * Lock Startup Volume checkbox

   11. Turn At Ease back on.
   12. Quit At Ease Setup for Workgroups."

09. How can I use DisEase to Hack At Ease?

DisEase is a fairly powerful utility for Hacking At Ease. It allows you to
manipulate At Ease, break out of At Ease, decode passwords, any number of
things that would render At Ease useless. The only problem is on most At Ease
protected system you are prevented from finder or floppy disk access, thereby
preventing you the ability to run DisEase in the first place. In these
situations, follow the above steps for breaking into the Finder, you can then
access DisEase and use it to decode the Administrator password.

10. Where can I find DisEase?

DisEase 1.0.......ftp://ftp.eskimo.com/u/a/adrenal/mac/DisEase.hqx
DisEase 3.0.......http://www.tyrell.net/~ibs/Hackr/Cracking/DisEase3.0.sit.hqx

Also you can contact the Author. macpants@aol.com

11. How can I Hack FoolProof?

FoolProof is Macintosh security scheme that uses driver level and Systems
Folder protection to prevent against bypassing. Driver Level protection is
protection written to the Driver Level of the Hard Disk. At this level, the
drive can not be mounted without envoking the protection. This condition will
continue to exist as long as the Driver remains intact. Here are some methods
of defeating it.:

IMPORTANT NOTE--The FoolProof extension, among other things, intercepts the
Restart & Shutdown calls from the System and makes sure to disable any
external boot device whenever a Restart or Shutdown is called. To defeat
this, when you Restart YOU HAVE TO DO HARD RESTARTS (ctrl-opt-del). When you
do hard Restarts no calls are made to the System, and the System is restarted
without locking or protecting anything. So be sure to do HARD RESTARTS when
hacking FoolProof.

Floppy Boot--As detailed in the beginning of this section, Boot from a floppy
with command-option-shift-delete held down. This will prevent the Protected
Driver from loading. Once the System is loaded you may need to use a Disk
mounting utility to Mount the Hard Drive. Once the drive is mounted, Move the
FoolProof Extensions and Prefs out of the System folder and Restart.
FoolProof should be disabled.

exit_to_shell--Restart and hit the interrupt switch while the INITs are
loading and call an exit_to_shell (see MacsBug section), then Move the
FoolProof Extensions and Prefs out of the System folder and Restart.
FoolProof should be disabled.

Find File Hack--If you're started up onto a FoolProof protected system,
you'll notice that you probably don't have access to the System Folder. If
you did you could drag the FoolProof Extension and Prefs out of the System
Folder and Restart without FoolProof protection. Well, believe it or not, the
Finder itself provide circumvention around this protection.

  1. From the Finder, go up to Find in the Filemenu. Search for 'Finder'

  2. Find is nice enough to find Finder for us in the Extension Folder, AND
     open the Extension Folder for our access. By NO sheer coincedence, the
     FoolProof extensions just happen to be in the same folder.

  3. Drag the FoolProof extensions out of the System Folder and Restart.
     FoolProof should be disabled.

Note--When you're done with all of the above methods, drag the FoolProof
extensions and prefs back into the System Folder and restart. Noone will ever
know you were there.

12. How do I access the Chooser when it is protected on Foolproof?

First try the default password 'foolproof'. If that doesn't work, Make a copy
of the Chooser and use ResEdit to change the Chooser Creator type from 'dfil
chzr' to 'dfil keyc'. This will reset the Password to the default:
'foolproof'. Swap (don't delete) the original Chooser with the modified copy.
Now you access the Chooser with the default password. When you're done, cover
your tracks by putting back the Original Chooser.

13. How can I defeat Passworded Control Panels?

The single most fundamental way to defeat a passworded Control Panel is to
Delete it's preferences. The preferences for any particular program is in the
Preferences folder in the System folder. In some cases it may be somewhere
else or in other cases the preferences may be invisible. A good program to
use to look for a Preferences file (or any file for that matter) is Norton
Disk Editor. This program allows you to search for a file by any number of
criteria, including attributes (thereby allowing you to search for Invsible
files). Once you've found the prefs for the Control Panel you're trying to
defeat, delete them (the prefs.) If you can't delete them write over them
using a file wiper  (see Part #07, File Wipers) Restart. In most cases,
whatever Control Panel you were trying to get into will be void of it's
password protection. This methods works good for: Screen savers, Virus
Programs, some security programs, and Network Managers.

14. How can I defeat the DeskTracy Control Panel (at Kinko's)?

Take a floppy with a File Wiper on it (see Part #07, File Wipers) to
Kinko's. Open -> System Folder: Extensions: Desk Tracy Folder Drag the files
'DTPreferences' and 'UData' onto the file wiper. Go up to the Menubar, you
should see your Login name up there, drag down to 'Configuration'. Don't
change anything, just click the Close Box and it will ask you if you want to
Save. Click 'Yes' Now go up to the Apple Option Menu and Select 'About Desk
Tracy'. It should beep at you, and then show you the Desk Tracy 'About'
Window. By this process, you have just Returned Desk Tray to it's Virgin
Installation State. All accounting is Off, and Desk Tracy is like it was
when it was First installed, BEFORE it was configured

15.  What is EtherNet or Packet Sniffing?

Ethernet sniffing is listening (with software) to the raw ethernet
device for packets that interest you.  When your software sees a
packet that fits certain criteria, it logs it to a file.  The most
common criteria for an interesting packet is one that contains words
like "login" or "password."

here are a couple of EtherNet sniffers:

Watch 1.7.1......http://vsl.cnet.com Search: 'sniffer'
EtherPeek Demo...ftp://ftp.aggroup.com/Public/demos

16. How can I EtherNet Sniff on the Mac?

(original by spooty , mods by filbert 4 the machaq faq)
This article will explain how to get someone's password for their unix
account etc., from the packets transmitted over a localtalk or ethernet
network. I will not bother to explain the difficulties (or impossibilities)
of cracking THE password file, or worse yet, shadowed passwords. If you want
to learn about these, go read alt.2600 and look at all the lamers asking how
to hack the password file in one easy step. What I will give you is the
simplest and most powerful way to acquire passwords. Sniffing packets may or
may not be punishable where you are. It may be shady behavior, or potentially
legitimate. Using someone else's password is obviously a no-no in the eyes of
admins, and the law, but then again, if you gave a shit, you wouldn't be
reading this. Ready?

First of all, you need a packet sniffer. Just about any sniffer will do.
Since this article is aimed primarily at Mac users, I will use Watch 1.7.1,
available at the Phruwt ftp site. This app will do nicely. Now, all you need
is a Mac and a network, both of which you will have to find yourself.

Any computer at a cluster at any company or university will probably be tied
into their network, at least for a local bridge. For older, smaller, or just
plain dumber networks, you will be able to access the entire LAN from any
computer connected to it. Otherwise you are limited to the particular zone to
which your computer is assigned. It shouldn't be too hard to find a good,
accessible zone, however. If there is a main computing center at a school,
for example, it will probably be both the site of accessible computers AND
the same zone that sysadmins use.

Alrighty. Time to get to work. Fire up your sniffer. The default settings on
Watch 1.7.1 are fine. Under the "Filter" menu, only "LAP ctrl capture" should
be checked. Click "start." Now you will see "packets" and "errors" begin to
add up. For the first time, let 50 or more packets pile up before you hit
stop. Now look at the packets. They will all have names like AFP, ATP, etc,
that will confuse the hell out of your newbie ass if you don't know what they
are. Don't worry about them. What you're looking for are the ones which are
labeled by either TCP or Telnet.

Anyone using Telnet to log into an account will have to enter both a userid
and a password. This is where your knowledge of terminals comes in. When
you're telnetting, or using any terminal-based software, every keystroke you
hit is sent to the server, and then the server responds somehow to your
screen in the terminal. For example, say you are typing a letter to someone
using pine or some other unix mailer. If you type "k", a "k" will be sent to
the server, and then a "k" will be sent back to appear on your screen. On the
other hand, if you're hitting space bar to advance a page or something, a
space will be sent, but the server will not return a space, but rather the
next page of text. Got it?

So what you're looking for is the userid/password interaction between the
client and server. By watching the packets (and you'll see this quickly),
you'll soon find some sucker firing up his account. The first sign will be
the server's prompt for the userid, which should be as plain as day. Then the
unwitting fool will start typing in his userid, and the server will be
displaying it on his screen like this (these are only the last few columns
you will see in Watch. For more detail, you can double click on any of the
packets):

(In this example, 25 is the server and 69 is the user's computer)

lap dst 69 lap src 25 Telnet: 'login:'
lap dst 25 lap src 69 Telnet: 'l'
lap dst 69 lap src 25 Telnet: 'l'
lap dst 25 lap src 69 Telnet: 'o'
lap dst 69 lap src 25 Telnet: 'o'
lap dst 25 lap src 69 Telnet: 's'
lap dst 69 lap src 25 Telnet: 's'
lap dst 25 lap src 69 Telnet: 'e'
lap dst 69 lap src 25 Telnet: 'e'
lap dst 25 lap src 69 Telnet: 'r'
lap dst 69 lap src 25 Telnet: 'r'

Of course anyone typing any words will look like this, so you have to be sure
this punk is logging in and not just blabbing about himself to his fat
girlfriend back home. So make sure he has received the login prompt before
this, by paying attention to the source and destinations of each packet (dst
and src). Also, all the packets may not be together like this. A lot of other
shit might be mixed in, so once again, lay off the crack and make sure the
packets you're looking at are all going to and from the same places (note:
the number for the server will just about always be the same and the varying
clients' addresses will differ).

Now when it's time for the password:

lap dst 25 lap src 69 Telnet: 's'
lap dst 69 lap src 25 Telnet: ' '
lap dst 25 lap src 69 Telnet: 'm'
lap dst 69 lap src 25 Telnet: ' '
lap dst 25 lap src 69 Telnet: 'e'
lap dst 69 lap src 25 Telnet: ' '
lap dst 25 lap src 69 Telnet: 'g'
lap dst 69 lap src 25 Telnet: ' '
lap dst 25 lap src 69 Telnet: 'm'
lap dst 69 lap src 25 Telnet: ' '
lap dst 25 lap src 69 Telnet: 'a'
lap dst 69 lap src 25 Telnet: ' '

Where, you ask, are the missing letters? They don't show up, because the
server doesn't reveal them on the user's screen, so the ol' peeking over the
shoulder technique won't work, unless you can follow someone's typing
fingers, which is hella difficult.

Okey dokey. You've got your userid and password. Go have fun now.

Unless, of course you want to hear about the other fun you can have with a
sniffer. Say for example, you're trolling around and see someone is reading
PORNO stories on usenet. One time I found this kid reading stories about some
little boy getting off by being spanked by his mom. What a fucking weirdo!
Anyway, you can pinpoint who is doing what pretty easily. Use another
program, like Trawl or Interpoll, and you'll be able to see what every
locally networked computers' addresses are. Usually you can get the owner
name too. Also, you can set Watch to filter out everything except the traffic
between two addresses. This is particularly useful, because most of the time
there will be so much fucking trash flying back and forth, that it will be
difficult to wade through it all.

This method is sort of a bitch to use, because you may have to just wait and
be lucky to get the password. You can be sneaky though like this:

Call some bastard up whose password you want. Be at a computer, if necessary
in his/her zone.

You: "Hey Jerky, didja get that kewl mail I sentya? Them: "Uh, let me
check..."
(Fire up your sniffer and do it quick!)
Them: "Hold on..."
(click, click, click, as they type away) Them: "All it says is 'hi.'"
You: "Oh whoops, I'll have to send it again. Bye."

Hang up, stop the packet collection and you've got paydirt.

If someone uses a desktop based mailing program, like Eudora, the collecting
account passwords is even easier. The packets will be marked "TCP" instead of
"Telnet" and in the text of the packet (you'll have to check the full details
of the packet for this) you'll find the whole text of the userid's and
passwords inside.

Sniffers are good for a lot of other shit too, so play around with them and
see what you get. Unfortunately, Apple Fileserver (AFS) passwords are a bear
to get, since they are usually two-way scrambled (sys 7.1 and higher, I
believe). I'm trying to figure out the encryption, but it's not really my
department. In any event, someone's account password will very often be their
server password too.

Although some systems are switching over to Kerberos protected transmission
of all packets across their LANs, most are still wide open. Doing something
butt-stupid, like changing someone's password on them, will only result in
them getting back into their account in a matter of hours, so be creative.
It's pretty fun just to watch (hence the name) the dark sides of all the
people you know. Then go up to them and say shit like, "Spank much lately?"
Have fun with this, and don't get caught.

17. How can I defeat a FileGuard protected system?

FileGuard is a powerful and versatile security system for the Mac that uses
Driver Level protection, Encryption and Owned Finder Resources to provide
controlled access to Protected system. In defeating FileGuard completely
you'll need to be able to eliminate the protection, and decrypt protected
filed.

Basic FileGuard Hack--FileGuard protection can be somewhat confusing. The
install process requires installing FileGuard onto a HardDisk, and then
installing the Driver Level protection of FileGuard after the initial install
has been performed. Because of this, and because of the way FileGuard acts
after the initial install, someone unfamiliar with FileGuard can easily be
left with the impression that his or her system is protected, when in fact
the Driver Level of FileGuard's protection has not beeen installed. Without
the Driver Level protection the FileGuard can be defeated by disabling
extensions. So to start, ry Restarting with the Shift-Key held down. If the
Driver Level protection of the system has not been installed, then you will
have unprotected access to the system.

FileGuard 2.7.x Hack--If the Driver Level of FileGuards protection has been
installed on the system, the only way to defeat the protection is to Hack the
password or to remove the Driver altogether. Password hacking is discussed in
more depth in the section on FileGuard 2.9.x. It is discussed their ecause it
is much more viable for that version of FileGuard. For this version (2.7.x),
the most viable way to defeat the security is to remove the Driver
altogether.

To remove the Driver you'll need to make an HD floppy Start up disk that has
a SCSI Driver utility on it. This is easy task given the amount of
information you need to cram on to a single 1.44mb Floppy. To aid you in
making this special floppy, I suggest you go by LaCie's home page and check
out how they suggest you do it.

LaCie.......http://www.teleport.com/~lacie/makestarter.html

This page can provide you insight on how to make a SCSI Driver Install disk
for use in FileGuard and other driver level protection hacking.

Try the following as a LAST RESORT:

  1. Get a high density disk. Install some startup software for the machine
     in question. Install some disk formatting software that ets you install
     new drivers (like Gold Triangle, Apple HD SC Setup, or Silver Lining).

  2. Restart, holding down command-option-shift-delete. This prevents the
     SCSI Bus from trying to mount the internal hard disk.

  3. Run disk formatting software and install a new driver over the old
     driver.

  4. Restart. No password should be prompted for.

  NOTE--This process will probably cause the hard disk to crash severely
  in the future!!! Only do this if there is something you really need on the
  disk. After you copy the needed files to a different place, you should
  REFORMAT THE HARD DISK.

FileGuard 2.9.x Hack--In the 'FileGuard 2.9 addendum' which highlights
changes in the latest release of FileGuard, it states:

  'FileGuard now allows you to customize the message that appears whenever
   the volume password is requested.'
                   . . . . . . . . . . . . .  . . . . .
  'Unless you checked the option 'Ask volume password at startup' (see
  below), the volume password is only requested when the FileGuard extension
  is not active (for example, if someone tries to boot with extensions off to
  bypass FileGuard). Since the volume's password is not regularly requested,
  you may also wish to customize this message to include some kind of reference
  which will trigger your memory in case you forget the volume password. Be
  sure not to type in an obvious reference that could let others easily guess
  the  password.'

What a give away. Heres how this hack would (potentially) work:

Normally, if a system is FULLY protected by FileGuard, when you Start up a
dialog will appear requesting a NAME and an ACCESS KEY. You're given three
opportunities to get it right or the System Restarts and you go through the
same thing again.

Now, if you try and Restart with the Shift-Key held down, the system will
load WITHOUT Extensions and without the FileGuard Control Panel. But even
without the Control panel, the System is still protected by the Driver Level
portion of FileGuard's Protection (provided Volume Protection has been
installed). But the Driver Level portion of Fileguard's protection is less
secure and for two reasons:

  1. The Driver Level protection puts up a message (as stated in the above
     mentioned 'addendum') which may, in and of itself, contain the password.

  2. The Driver Level protection doesn't ask for a NAME, only a VOLUME
     PASSWORD, thereby eliminating part of the guess work.

So, boot up a FileGuard system with the Shift-Key held down, read what the
FileGuard says, and start using the words within the dialog as potential
Passwords to the Volume. If that doesn't work, try possible single word
passwords (remember, you only have to enter one word). With a little effort
you might just exploit a vulnerability.

FileGuard Encrypted Files--Use FileGuard to encrypt a file with the password
'test', for example. Use ResEdit to copy the resource 'high' from that file.
Paste it into the file that contains the unknown password. Save changes and
quit. Decrypt the modified file with FileGuard using the password 'test'.

SECTION III: SYSTEMS HACKING
----------------------------

18. How Can I hack FirstClass?

FirstClass Defaults--Theirs only one FirstClass default I know of and it's a
doosie. Every FirstClass system comes with the Administrators account:

USER: admin
PASS: admin

The FirstClass Administration Manual very clearly states that the first thing
you are REQUIRED to do after Installing your FirstClass server is CHANGE this
password. But because of the way FirstClass is designed, it is often
overlooked. When you've installed your Server and loaded up the FC Client
Admin settings that come with the server, you never have to enter a password.
Its already saved into the Settings. So all you do is click Login and you're
in. And when first configuring a FirstClass system there are ALOT of things
to address and an inexpereinced Admin (as most Admins setting up an FC system
are) will often overlook changing this default account.

Password Dig--Theres a utility called FirstClass Digger 1.x which will dig
passwords out of the FirstClass server. This utility is available at via
SoftArc Online. For more info on SAOL goto the SoftArc home page:
http://www.softarc.com

Admin Password Dig--There is one way to hack FirstClass if you have physical
access to the server. To do this, you first open the root level of the hard
drive and then open the folder named "FirstClass Post Office". The locate the
foldernamed "UserDir" and open that. From there, open the folder named
"admin.". Then copy the file named .ENProf onto a disk. When you have the
time, open it up with Microsoft Word. To do this, you must change the "Show"
pull-down menu from "Readable Files" to "All Files" and THEN locate the
.ENProf. You will see the admin's password around the fourth or fifth line.
If the admin. is using a shorter password than he used to, then you will see
his password, followed by the correspoding characters of his old password.
I.E., if someone changed their password from "systemadmin" to "admin." it
would look like "adminmadmin". If you do not get on with the whole string
listed, try passwords by taking the last letter away until you get it. You
can now give yourself Administrator privs. From there, you can do everything
the real admin. can do, EXCEPT open the Admins desktop, and grant other users
admin. privs.

Admin Accounted Settings--Another one I've seen, is when a FirstClass Admin
is setting up a new Server, one of the things they can do to add to the look
of their System is make custom Settings file. Well this Custom setting file
is usually just the Admin settings file modified. They modify it a ittle bit
at a time, and then to check to see how it looks they'll login to their
system. For the sake of ease they'll go ahead and have the Username and
Password saved so all they have to do to test the setings after a
modification is click Login (cuts down on the time required to enter the name
and password). Well after a few hours or days of making the perfect settings
file, they're tired, and happy and releived and whole bunch of other things
that lead to distractions. They think they're done, and they Stuff their
settings file and distribute it on BBSs or the Internet so people can use the
settings to access their FC system. What did they forget to do? They forgot
to delete the Admin username and password from the settings file. By the time
they've found out, someone has already logged in with the uAdmin account (all
they had to do was click Login), accessed the Hard drive, found their way to
the DTP or Acconting folder, and stolen confidential or personal files.

FC Time Limit Hack--Next time you're logged into a FirstClass system be sure
to go upto view and select Session Status. Keep track of your time. When
you're time is almost up, go up to the menu bar and hold a menu open. The
System won't log you off under these this ondition. Wait for about 30 seconds
past the time you're supposed to be logged off. Let go of the menu and you'll
still be logged on and can stay logged on indefinitley.

19. What is UNIX Password Hacking?

Traditionally stated, the purpose of hacking a UNIX is: to "get to ROOT."
This refers to the ROOT account that every UNIX system has as part of it's
Operating system. The ROOT is a 'Trusted User' account, THE most powerful
account on a UNIX. If you can hack a ROOT you can utilize or exploit every
function a UNIX is capable of. But to get to "ROOT" you have to have
somewhere to start. one of the most common places to start is with the
'passwd' file.

'passwd' is the common name of the file in which user account information is
stored on a UNIX system. You might consider it a comprehensive users list.
The file contains the information for an accounts USERNAME, PASSWORD, USER
NUMBER, GROUP, GECOS, HOME DIRECTORY, and SHELL. A single entry of a passwd
file entry might look like this:

                 PASSWORD        GROUP NUMBER    HOME DIRECTORY
                /               /               /
               /               /               /
  kbahadur:8d34jSjs73hsb:2162:15:Ken Bahadur:/usr/users/kbahadur:/usr/bin/ksh
   \                      \             \                          \
    \                      \             \                          \
     USERNAME               USER NUMBER   GECOS INFORMATION          SHELL

Now then, if you can see this:

           encrypted equivalent of pasword
             /
kbahadur:8d34jSjs73hsb:2162:15:Ken Bahadur:/usr/users/kbahadur:/usr/bin/ksh

...you can use a passwd' file crackers to "guess" the password to this
account entry. Once you've guessed an accounts password you can use that
account to try and hack root. Try theses common commands on a UNIX to attempt
to steal the 'passwd' file.

UNIX 4.x.................cat /etc/passwd
AiX......................cat /etc/security/passwd
yp/NIS (yellow pages)....ypcat passwd

20. How Can I do it on the Mac?

'passwd' File Crackers--Hacking UNIX can be done on any machine, the only
place where it can become localized (like on your Mac) is in the process of
hacking 'passwd' files. To hack a 'passwd' file on a Mac, you need a password
file cracker FOR the Mac. A few such programs are:

MacKrak 2.0b1.........ftp://ftp.armory.com/pub/user/swallow/
MacCrac v.01a.........http://iti2.net/k0p/mac_u-g/MacCrac%20FAT%200.1A.sit.bin
Killer Cracker 8.0....http://www.tyrell.net/~ibs/Hackr/Hacking

Word Lists--To use the above listed 'passwd' file crackers you need
Dictionary or Word List files. MacCrac comes with a fairly large Dictionary
(2meg), but for the other programs you need to find your own. Paul Leyland
runs Word List f*ckin' central. Hes got hundreds of Word Lists for dozens of
nationalities and criteria, for example: Star Trek, Swahili, American,
French, Names, Dog Names, just a shit load. check him out:

Word Lists............ftp://ftp.ox.ac.uk/pub/wordlists/

Word List utilities--You can combine several different word lists to make
custom Dictionaries for special (hacking) occassions. A utility that can
bring considerable ease ease to this task is Word List Maker. Word List Maker
is a 'drag&drop' utility to create sorted lists of words from arbitrary text
files. You can drop several text files and/or custom MS-Word dictionaries on
to the WordListMaker icon to create a single word-list. You can also exclude
arbitrary words from the output file. It will combine 2 or more Word Lists,
alphabetize them and delete the duplicates.

WordListMaker v1.6....ftp://mirror.apple.com/mirrors/Info-Mac.Archive/text

SECTION IV: PHREAKING
---------------------

21. What is phreaking?

Phreaking is the exploration, use, abuse, and/or defraudment of the telephone
system via the manipulation of telephone system circuits, switches or
services. Phreaking is commonly performed by generating tones which allow you
to utilize various functions of the phone system usually reserved for
internal use. The afforementioned tones can be generated by software programs
designed to perform this purpose. These warez are commonly referred to as
'phreaking warez'

22. What are some phreaking warez for Macs?

FoneTone Pro v1.0--FoneTone Pro v1.0 is a United Kingdom Blue Boxing program.
Blue boxes use a 2600hz tone to size control of telephone switches
that use in-band signalling. The caller may then access special switch
functions, with the usual purpose of making free long distance phone calls,
using the tones provided by the Blue Box. Depending on who you ask, most
people will tell you Blue Boxing is no longer possible in the United States.
It is, however, still widely performed in Europe.

FoneTone Pro v1.0
http://www.tyrell.net/~ibs/Hackr/Phreaking/FoneToneProv1.0.sit.hqx

MacPhoney--MacPhoney is a RainBow box emulator. That is, it's a box that
performs a number of different boxing tones. These tones include Green
Box--pay phone tones, Red Box--pay phone toll tones, White Box--AutoVon
tones, and TouchTones--standard dialing tones.

MacPhoney
http://www.tyrell.net/~ibs/Hackr/Phreaking/Phoney4Mac.sit.hqx

23. How can I use these programs?

Mac Phreaking programs work by producing tones which when played through
phone lines will have the potential of exploiting functions of the phone
system. The generated tones are produced through the Mac speaker. For the
tones to be effectivley played through the phone line, it is best to have the
phone line connected to the Audio Out jack of your Mac or Newton. The best
illustration of how this is done comes from Mr. Upsetter in a Submission made
to and published in Phrack 38.

 AUDIO LINKS
 ~~~~~~~~~~~
By Mr. Upsetter

It all started with my Macintosh...

Some time ago I had this crazy idea of connecting the output from the
audio jack of my Macintosh to the phone line.  Since the Macintosh has
built in sound generation hardware, I could synthesize any number of
useful sounds and play them over the phone.  For instance, with a sound
editing program like SoundEdit, it is easy to synthesize call progress
tones, DTMF and MF tones, red box, green box, and other signalling tones.
So I set out to do exactly this. I created a set of synthesized
sounds as sound resources using SoundEdit.  Then I wrote a HyperCard stack
for the purpose of playing these sounds.  Now all I needed was a circuit
to match the audio signal from the headphone jack of my Mac to the phone
line.